Direwolf and Jnos (review)

In the previous post about Direwolf and jnos i use Direwolf-1.3 and does not know about the SERIALKISS port.
John WQ6N point it out to me… Tnx John WQ6N. Nice one.
Read the previous post.
So maybe I wrote that script for nothing. This is working pretty simple 🙂

In Direwolf 1.5-beta is it possible to use SERIALKISS to connect com to com.
I have try to use a PTY pair created with socat.

# Create pty pair
socat -d -d -ly PTY,link=/dev/ttyq1 PTY,link=/dev/ptyq1 &
sleep 2
# Start Direwolf
direwolf -d kn -c /direwolf/direwolf.conf &> /var/log/direwolf.log >/dev/tty3 &
sleep 2

Direwolf.conf
SERIALKISS  /dev/ttyq1 19200

# Jnos autoexec.nos
attach asy ptyq1 - ax25 ax0 4096 256 19200

Fireup Jnos
./jnos -C -g2 -u3 -f nos.cfg -i

I use conspy to look at the output of Direwolf. apt-get install conspy
Use it just like this “conspy 3” The number 3 stands for the tty were Direwolf is running on /dev/tty3.
Hit the escape button a couple of times to exit.

Here is the output of Direwolf

>>> Data frame to KISS client application, port 0, total length = 82
  000:  c0 00 92 88 40 40 40 40 e0 9c 98 70 b4 b4 8a 60  ....@@@@...p...`
  010:  ae 92 88 8a 62 40 63 03 f0 43 6f 6e 6e 65 63 74  ....b@c..Connect
  020:  20 4e 4c 36 5a 5a 45 20 66 6f 72 20 74 68 65 20   PD2LT-6 for the
  030:  4a 4e 4f 53 20 43 6f 6e 76 65 72 73 20 28 6c 69  JNOS Convers (li
  040:  6e 6b 65 64 20 77 69 74 68 20 6f 74 68 65 72 73  nked with others
  050:  29 c0

Ok that is working quit well.
I start Direwolf with the option “-d kn” So you can look at the kiss communication between Direwolf and Jnos.

Some text out of the User-Guide.pdf.
“Up to 3 concurrent TCP KISS client applications are allowed at the same time.
You can raise this limit by increasing the value of MAX_NET_CLIENTS, in source file kissnet.c and recompiling.”

Whoooo thats nice up to 3 (and more) applications can connect to Direwolf on the KISSPORT.
And there is also the AGW and the SERIALKISS port. Men where do I start.

John WQ6N

John WQ6N has found something that is useful. He use a Legacy BSD pseudo pair.
There are no Legacy BSD pseudo pairs in Linux any more. But it is possible to create some.

/etc/default/grub:
Change line from:
GRUB_CMDLINE_LINUX=""
to:
GRUB_CMDLINE_LINUX="pty.legacy_count=10"
(Where 10 is the number of pty legacy devices you require.)
This created 10 ptypX/ttypX terminal pairs.

After editing the grub file run the command “update-grub” and reboot.

So now it`s time to set Direwolf and Jnos to use the pty Legacy devices.

The Direwolf SERIALKISS 
SERIALKISS /dev/ptyp0 19200

The associated JNOS2 attach line:
attach asy ttyp0 - ax25 hfgw 4096 256 19200

2 thoughts on “Direwolf and Jnos (review)”

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.