Bpq32 with QtSoundModem and Hamlib

Yesterday I added 2 HF ports to my Bpq32 Node / BBS. I have chosen to use QtSoundModem and Hamlib. QtSoundModem is a Linux port or Soundmodem from UZ7HO. I use Hamlib/rigctld to take control of the Tranceiver. QtSoundmodem and Hamlib run on a different Raspberry than the BBS and Node.

After some testing I found out that I need Hamlib version 3.3 to control the icom 7300. The versions 4.0 and 4.1 do not work for me. Apparently the icom 7300 is not being initialized. Can’t actually find out why this is. With the command “rigctld -l” you get a list of which tranceivers are supported.

So I need number 373 for the Icom 7300.

/usr/local/bin/rigctld -m 373 -r /dev/ttyUSB0 -s 19200 -T 44.137.31.76 -t 4532 &

In the QtSoundModem.ini I have in the [Init] section.

HamLibHost=44.137.31.76
HamLibPort=4532
PTT=HAMLIB
PTTBAUD=19200
PTTMode=17

Now the bpq32.cfg

PORT
 PORTNUM=4
 ID=14.1022 +1100Hz
 DRIVER=UZ7HO
 CHANNEL=A
 PACLEN=80
 CONFIG
  ADDR 44.137.31.76 8101 ; AGW port of QtSoundModem
  BEACONAFTERSESSION
  MAXSESSIONS=5
ENDPORT

PORT
 PORTNUM=5
 ID=14.1022 +2000Hz
 DRIVER=UZ7HO
 CHANNEL=B
 PACLEN=80
 CONFIG
  ADDR 44.137.31.76 8101 ; AGW port of QtSoundModem
  BEACONAFTERSESSION
  MAXSESSIONS=5
ENDPORT

With Hamlib it is also possible to control the TRX from Bpq32. I immediately added a Robust 300 packet port to Bpq32 with rig control. Here is an example.

PORT
 PORTNUM=3
 ID=Robust 300 ;(RPR Packet)
 TYPE=EXTERNAL 
 COMPORT=/dev/ttyUSB0
 SPEED=38400
 DRIVER=SCSTracker
 INTERLOCK=3
 CONFIG
 RIGCONTROL
HAMLIB 44.137.31.76:4532
15,14.1022,USB,F1,R1,H1
15,7.04510,USB,F1,R1,H1
****
WL2KREPORT PUBLIC, api.winlink.org, 80, PI8LAP-10, JO11VN, 00-23, 14102200, ROBUST, 25, 35, 3
WL2KREPORT PUBLIC, api.winlink.org, 80, PI8LAP-10, JO11VN, 00-23, 14102200, PKT300, 25, 35, 3
WL2KREPORT PUBLIC, api.winlink.org, 80, PI8LAP-10, JO11VN, 00-23, 144850000, PKT1200, 10, 20, 5, 0
WL2KREPORT PUBLIC, api.winlink.org, 80, PI8LAP-10, JO11VN, 00-23, 430950000, PKT9600, 10, 20, 5, 0
;#
  M UISC
  O 4                   ; MAXFRAME
  F 190                 ; FRACK
  T 8                   ; TX Delay
  FORCE ROBUST
  USEAPPLCALLS          ; Accept connects to all APPLCALLS
  BEACONAFTERSESSION    ; Beacon after session
  %L 1500               ; Centre Freq for Normal Packet (Default is 1500)
  @I 64                 ; Paclen = 60
  %T 1                  ; TX Autotracking 1 = on
  %N 10
  %B 300
ENDPORT

/var/log/syslog

Apr  4 16:34:41 pi1lap : Initialising Port 01     TCPKISS IP 127.0.0.1 Port 8001 Chan A
Apr  4 16:34:41 pi1lap : Initialising Port 02     TCPKISS IP 127.0.0.1 Port 8001 Chan B
Apr  4 16:34:41 pi1lap : Initialising Port 03     SCSTRK /dev/ttyUSB0
Apr  4 16:34:41 pi1lap : Initialising Port 04     UZ7HO Host 44.137.31.76 Port 8101 Chan A
Apr  4 16:34:41 pi1lap : Initialising Port 05     UZ7HO Host 44.137.31.76 Port 8101 Chan B
Apr  4 16:34:41 pi1lap : Initialising Port 06     ASYNC /dev/ttyUSB1 Chan A

 

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.