NinoTnc update

On my very expensive scoop (hi) you see a packet frame @ 1200 Baud received from a station about 50 kilometers away. Looks fine to me.

After updating the Firmware from version V2.35 to V2.81 I see a good increase in the decoded frames.

How to update the Firmware

wget http://tarpn.net/zflash2020oct/tarpnflashinstaller.sh
chmod +x tarpnflashinstaller.sh
./tarpnflashinstaller.sh

Run
tarpnflash usb
* My Ninotnc is connected to ttyACM0.
tarpnflash version ttyACM0
* Is there a newer version available in the dir "ninotnc" you can run.
tarpnflash flash ttyACM0 (version number)
* Now the Firmware is being updated.
* Check if the flash of the firmware went well.
tarpflash version ttyACM0
* Great now running Version v2.81
/dev/ttyACM0 NinoTNC v2.81

I immediately built my second NinoTNC. I am very curious how that works with IL2P mode, Improved Layer 2 Protocol. In the picture below, the two NinoTnc`s are running at 2400 Baud with IL2P mode. Functions perfectly. Now I have some problems with adjusting to 4800 and 9600 Baud. I have to look into this.

[0]N9600A3>IDENT::TestPacket=FirmwareVr:2.81=SerialNmbr<0x00<0x00<0x00<0x00<0x00<0x00<0x00>0x00>=UptimeMilS:0007C5F2=BrdSwchMod:02060002=AX25RxPkts:0000001B=IL2PRxPkts:00000000=IL2PRxUnCr:00000000=TxPktCount:0000000A=PreamblCnt:0000001D=LoopCycles:006CD389