This is about RX and not TX.
This has caused some headaches. I want to use one trx and one antenna for this test. (Icom 7300 and a Hyendfed)Now the problem is that Direwolf and QtSoundModem both use the sound card. Now you can’t both use the same sound card at the same time. So we will have to use two virtual sound cards and route the audio to these sound cards. For this I use “pactl” with this I can manipulate the PulseAudio server.
pactl load-module module-virtual-sink sink_name=direwolf And pactl load-module module-virtual-sink sink_name=qtsoundmodem
Actually we are making a virtual audio card for Direwolf and QtSoundModem. Now we need to route the Audio from the input to the virtual audio card. This is possible with PavuControl.
Setup Direwolf
ADEVICE pulse ACHANNELS 1 CHANNEL 0 MYCALL N0CALL MODEM 300 1000 1200 AGWPORT 8008 KISSPORT 8009
Uhmmmmm port 8001. I don’t understand that yet, in the config it really is port 8009.
Setup QtSoundModem
Now I haven’t fully read up on PulseAudio and pactl and the virtual cable/cards. Perhaps my wording and references are not quite correct.
Now I have the opportunity to test…..