Xnet axudp link Jnos

The axudp link from xnet to jnos has caused a lot of problems.
But he is up and running … Here the explanation.

In the line “attach axudp xnet 256 192.168.1.112” (jnos) is the secret.
This must therefore “not” refer to the ip address of xnet like you
have indicated in ip.net at myip, but to the IP address of Linux itself.
So the ip address of (for example) eth0

Autoexec.nos (Jnos)

attach tun tun0 1500 0
#
ifconfig tun0 ipaddress 192.168.1.222
ifconfig tun0 netmask 255.255.255.0
ifconfig tun0 mtu 1500

shell ifconfig tun0 192.168.1.221 pointopoint 192.168.1.222 mtu 1500 up
pause 2
shell echo 1 >/proc/sys/net/ipv4/ip_forward
shell /usr/sbin/arp -i eth0 -Ds 192.168.1.222 eth0 pub

attach axudp xnet 256 192.168.1.112 (ip-adres Linux (eth0))
ifconfig xnet description "axip link xnet"

Eth0 (Linux)

eth0      Link encap:Ethernet  HWaddr 00:12:3f:2b:c6:6f
          inet addr:192.168.1.112  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::212:3fff:fe2b:c66f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7844 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7255 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:885500 (864.7 KiB)  TX bytes:1166950 (1.1 MiB)
          Interrupt:16

Ip.net (xnet)

IP.net
#        File: IP.NET
#       (X)Net IP Address
#
myip 192.168.1.201
subnet 192.168.1.0/24
#
# ARP entry for all received IP Frames
arp add 192.168.1.201 slip sdev6
#
#
# Default route
ipr add default SLIP 192.168.1.201
#
iproute add 192.168.1.0/24 slip 192.168.1.201

Autoboot.net (xnet)

attach IP0 axudp 0 1 192.168.1.222   (Ip-adres van Jnos) 

po 0 acon 1
po 0 baud 9600
po 0 dup 0
po 0 win 7
po 0 quality 0
po 0 name pd2lt
r bc ad 0 pd2lt
r bc ad 0 nodes
ro lo a 0 pd2lt-9 d