Dx Cluster PI1LAP-1

PI1LAP is Running DXSpider as Cluster Software. With Postgresql as database backend for Web Cluster http://dx.packet-radio.nl

PI1LAP is also connected to the Reverse Beacon Network (RBN). Now it is possible to see (Live) Spots from CW, BEACON, RTTY, PSK, FT8 and FT4.
Connect to PI1LAP-1 (telnet dx.packet-radio.nl 7300) and give the command “help set/skimmer” to get help about the skimmer feed.

The skimmer feed from CW and FT8 / FT4 can be overwhelming. Now there are all kinds of possibilities to filter this to specific spots. Filter help use the command “help filter” on the cluster.

# Possible Filter
To only allow FT4 spots you can use a filter
set/skimmer ft
reject/rbn 1 info ft8
show/filter # Show the rules in the filter
clear/rbn 1 or all # Delete filter rule

If you like Dx spots (just like me) you can go to “telnet dx.packet-radio.nl 7300

See ya on the Cluster.

Website DxSpider http://www.dxcluster.org/

Install Dxspider on a Debian system

Here is a list of command’s that i use to install dxspider on a fresh system.

sudo apt-get install wget
sudo apt-get install git-core
sudo groupadd spider
sudo useradd -m sysop -G spider
sudo usermod -g spider sysop
sudo passwd sysop
sudo adduser sysop sudo

Install the perl modules

sudo apt-get install libtimedate-perl
sudo apt-get install libnet-telnet-perl
sudo apt-get install libcurses-perl
sudo apt-get install libdigest-sha-perl
sudo apt-get install libdata-dumper-simple-perl

Simlink and reboot

sudo su
cd ~sysop
ln -s /home/sysop/spider /spider
shutdown -r now

After restart login as sysop

login sysop
cd ~
mkdir spider
git clone git://scm.dxcluster.org/scm/spider spider.new
cp -a /home/sysop/spider.new/.git /spider
rm -rf spider.new
cd /spider
git reset --hard
sudo su
cd /home/sysop/
chown -R sysop.spider spider
find . -type d -exec chmod 2775 {} \;
find . -type f -exec chmod 775 {} \;
exit
cd /spider
mkdir local
mkdir local_cmd
cp perl/DXVars.pm.issue local/DXVars.pm
cp perl/Listeners.pm local/Listeners.pm
cd local
nano Listeners.pm
- edit DXVars.pm following the instructions in the comments
- edit Listeners.pm to remove “#” from the line for the port, and add additional ports as needed:
@listen = (
 [“0.0.0.0”, 7300],
);

Next create the sysop

cd /spider/perl/
./create_sysop.pl

Next get the us database

cd /tmp
wget http://ftp.w1nr.net/usdbraw.gz

The next step can take a few minutes

/spider/perl/create_usdb.pl /tmp/usdbraw.gz
cd /spider/src
make

Let start the cluster

cd /spider/perl
./cluster.pl

On a separate ssh or system console, log into the system as sysop

/spider/perl/console.pl

From the command line of the console enter:

load/usdb # US database ?

Edit /etc/inittab to add the following two lines at the end of the file.
Start DXSpider on bootup and respawn it should it crash.

DX:2345:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop >/dev/tty6

Add a line to /etc/services for spider

spdlogin   7400/tcp     # spider anonymous login port

Add a line to /etc/inetd.conf for spider

spdlogin       stream  tcp     nowait  sysop   /spider/src/client client login ax25

Add a node to your system.
Create in the dir /spider/connect a file with the name of the node.

nano /spider/connect/pi1lap-4

timeout 15
abort (Busy|Sorry|Fail)
# don't forget to chmod 4775 netrom_call!
connect telnet 44.137.31.65 7300
'login' 'pi1lap-4'

Chmod 4755 pi1lap-4

Now login to your spider.

/spider/perl/console.pl

Hello Niels, this is PI1LAP-4 in Kortgene ZLD, Nederland
running DXSpider V1.55 build 0.196
Cluster: 241 nodes, 1 local / 433 total users  Max users 433  Uptime 5 03:45
PD2LT de PI1LAP-4  8-Dec-2017 1845Z dxspider >
Page Length is now 500
PD2LT de PI1LAP-4  8-Dec-2017 1845Z dxspider >

set/spider pi1lap-4
PI1LAP-4 set as DXSpider style Node
PD2LT de PI1LAP-4  8-Dec-2017 1847Z dxspider >

 

Installeer DxSpider op Debian Wheezy

# Install Dx-Cluster

sudo apt-get install wget
sudo apt-get install git-core
sudo groupadd spider
sudo useradd -m sysop -G spider
sudo usermod -g spider sysop
sudo passwd sysop
sudo adduser sysop sudo

# Perl modules
sudo apt-get install libtimedate-perl
sudo apt-get install libnet-telnet-perl
sudo apt-get install libcurses-perl
sudo apt-get install libdigest-sha-perl
sudo apt-get install libdata-dumper-simple-perl

sudo su
cd ~sysop
ln -s /home/sysop/spider /spider
shutdown -r now

After restart login as sysop
cd ~
mkdir spider
git clone git://scm.dxcluster.org/scm/spider spider.new
cp -a /home/sysop/spider.new/.git /spider
rm -rf spider.new
cd /spider
git reset –hard
sudo su
cd /home/sysop/
chown -R sysop.spider spider
find . -type d -exec chmod 2775 {} ;
find . -type f -exec chmod 775 {} ;
exit
cd /spider
mkdir local
mkdir local_cmd
cp perl/DXVars.pm.issue local/DXVars.pm
cp perl/Listeners.pm local/Listeners.pm
cd local
mc
– edit DXVars.pm following the instructions in the comments
– edit Listeners.pm to remove “#” from the line for the port, and add additional ports as needed:
@listen = (
[“0.0.0.0”, 7300],
);

cd /spider/perl/
./create_sysop.pl
cd /tmp
wget http://ftp.w1nr.net/usdbraw.gz
# The next step can take a few minutes
/spider/perl/create_usdb.pl /tmp/usdbraw.gz
cd /spider/src
make
cd /spider/perl
./cluster.pl
# on a separate ssh or system console, log into the system as sysop
/spider/perl/console.pl
# from the command line of the console enter:
load/usdb # US database ?

# Edit /etc/inittab to add the following two lines at the end of the file.
##Start DXSpider on bootup and respawn it should it crash
DX:2345:respawn:/bin/su -c “/usr/bin/perl -w /spider/perl/cluster.pl” sysop >/dev/tty6

Add a line to /etc/services and /etc/inetd.conf for spider
/etc/services

# Local services
bpqspider 7400/tcp # BPQ to Spider Link

/etc/inetd.conf

sudo apt-get install openbsd-inetd

bpqspider stream tcp nowait sysop /spider/src/client client login ax25

Restart inetd – sudo killall -1 inetd